Stationary Infantry Target Installation

Our stationary infantry target comes in two main versions: portable and fixed. The fixed version can be set up on the ground or mounted on a wall. Regardless of your choice, both versions offer the flexibility of a height-adjustable mechanism for easy setup. They can either come with a stackable stainless steel frame or be attached to a transport base housing all essential components for operation. The portable version is typically battery-powered and controlled by radio. One of its advantages is its transport frame, which allows for easy placement without any prior site preparation, as long as it's shielded from direct shots and ricochets. Furthermore, you can change its location without fussing over infrastructure changes.

The target holder features a contact hit sensor that detects and counts any mechanical impact on the target silhouette from incoming projectiles. It's adept at registering both subsonic and supersonic strikes from all calibers of live-fire and training ammunition, including pistols, rifles, and machine guns. Furthermore, the sensor's sensitivity can be adjusted to only recognise impacts exceeding a set threshold. Additionally, it offers two modes: single shot and burst, with the latter counting a rapid series of shots as just one hit.

What is the lifting capacity of the stationary infantry target?

The stationary infantry target can swiftly move military targets weighing up to 11 lbs ( 5 kg), like full or half-sized 2D & 3D infantry targets, in under a second when there's no wind. In winds of 55 km/h, it can adjust these targets' positions in less than two seconds.

What additional equipment is available for the target?

The stationary infantry target is versatile and can be enhanced for diverse training scenarios. It features an illumination unit that can brighten targets for nighttime training, with an option to add infrared lighting. To add to the realism, there's a Muzzle Flash Simulator that replicates the flash seen when weapons fire. For more dynamic training, an optional adaptor allows the target to execute turning actions. Training realism is further amplified with pyrotechnic and non-pyrotechnic fire simulations. Additionally, a thermal feature is available that overlays a lifelike heat image on targets. For those focused on accuracy, the system integrates a LOMAH feature to precisely track where shots land and highlight close misses. To ensure safety and equipment longevity, a protective ballistic shield can be attached to prevent equipment damage and minimise ricochets.

Stationary Infantry Targets for Shooting Ranges

Our stationary infantry targets are designed for controlled and repeatable training in professional shooting range environments. Unlike moving target systems, the base of the stationary target system remains fixed, while the target holder performs various movements and presentation modes to simulate realistic exposure scenarios.

This stationary infantry target system is available in two configurations—SIT Standard and SIT Advanced—each offering different levels of target presentation functionality to match specific training requirements.

REQUEST MORE INFO

Download
Data Sheet

Key Advantages of Stationary Infantry Targets

Advanced Pop-Up Mechanism (SIT Advanced)

The SIT Advanced stationary infantry target system features an advanced pop-up and shearing mechanism, designed for realistic and controlled target exposure. This functionality allows precise simulation of targets emerging from cover, supporting effective marksmanship training and target identification. Available exclusively in the SIT Advanced configuration, the system can be expanded with additional adaptors, ensuring flexibility for different shooting range layouts and training requirements.

Accurate Hit Detection with Adjustable Sensitivity

The stationary infantry target system is equipped with a contact hit sensor that provides precise feedback on target impacts. Adjustable sensitivity allows the system to accurately detect hits across various types of ammunition, ensuring reliable performance in different training scenarios. This feature supports consistent evaluation of shooting accuracy, making it suitable for both SIT Standard and SIT Advanced configurations in professional shooting range environments.

Flexible Deployment Options

The stationary infantry target system is available in both portable and fixed-installed versions, supporting a wide range of training setups. This flexibility allows use in mobile, on-the-go training as well as permanent shooting range environments. Suitable for both temporary exercises and established range installations, it ensures consistent performance across different operational needs.

Flexible Control Options

The stationary infantry target system supports both radio-controlled and hardwired operation, allowing seamless integration into different shooting range setups. This flexibility enables reliable control across a range of training environments, from mobile deployments to fixed installations.

Flexible Power Supply Options

The stationary infantry target system can be operated using either battery power or mains electricity, ensuring uninterrupted training across different shooting range environments. This flexibility supports both mobile deployments and permanent installations without compromising performance.

Reliable Performance in All Environments

The stationary infantry target system is built with a rugged, weather-resistant design, ensuring consistent performance across diverse shooting range environments. It is suitable for both indoor and outdoor training and maintains reliability under demanding operational conditions.

Safe and Hassle-Free Operation

The stationary infantry target system is designed for reliable, trouble-free functionality, ensuring smooth operation during training. Its user-friendly design enables safe, easy handling, supporting efficient setup and operation in demanding shooting range environments.

Built-In System Diagnostics

The stationary infantry target system features an integrated test capability for seamless system health checks. This allows operators to quickly verify functionality and ensure reliable performance before and during training.

Stationary Target Presentation Modes

Pop-Up Mode

In the SIT Standard stationary infantry target system, the pop-up mode enables controlled vertical movement of the target silhouette while the base remains fixed. This simulates realistic exposure from cover, supporting marksmanship training and target identification in shooting range environments.

The system allows precise control of target behavior, with the following presentation options

Lifting and lowering the target silhouette
Automatic lowering after a registered hit
Lowering after a predefined number of hits
Lowering after a hit with automatic re-exposure of the target

REQUEST MORE INFO

Extended Target Presentation Modes

The SIT Advanced stationary infantry target system expands training capabilities with additional target presentation modes, enabled through optional adaptors. While the base system remains fixed, the target holder performs a variety of movements to simulate complex and realistic engagement scenarios in shooting range environments.

The following target presentation modes are available in the advanced configuration:

Turning – rotating the target silhouette for directional exposure
Climbing – vertical movement simulating targets rising from cover
Shearing – lateral shifting of the target silhouette
Slashing – angled movement for unpredictable exposure
Sliding – horizontal movement along a fixed axis
Raising – controlled elevation of the target silhouette

REQUEST MORE INFO

Stationary Infantry Targets in Action

Frequently asked questions

The stationary infantry target system is designed for flexible installation in a wide range of shooting range environments. It is available in two main configurations—portable and fixed—allowing it to adapt to different operational and infrastructure requirements.

The fixed stationary infantry target system is installed directly on the ground and is intended for permanent shooting range setups. It features a height-adjustable mechanism that enables precise positioning of the target silhouette for consistent, repeatable training conditions. Fixed installations can be configured with a robust stainless steel frame or integrated into a dedicated base structure.

The portable stationary infantry target system is designed for mobile and temporary training scenarios. It is typically battery-powered and operated via radio control, allowing for quick deployment without complex installation. The integrated transport frame enables easy placement and repositioning without prior site preparation, provided the unit is properly protected from direct fire and ricochets.

This flexibility makes stationary infantry targets suitable for both permanent shooting range installations and on-the-go training environments, ensuring reliable performance and adaptable training setups.

The stationary infantry target system is equipped with an advanced hit counting solution that accurately detects and records projectile impacts on the target silhouette. Each target holder integrates a contact hit sensor that registers mechanical impacts from incoming rounds, providing reliable feedback for shooting range training.

The system is capable of detecting both subsonic and supersonic ammunition across a wide range of calibers, including pistols, rifles, and machine guns. This makes it suitable for use in professional shooting range environments, supporting both military and law enforcement training applications.

To ensure precise performance, the sensor features adjustable sensitivity settings. This allows operators to define impact thresholds, ensuring only valid hits are registered and improving accuracy while reducing false readings across different training scenarios.

The stationary infantry target system also supports multiple firing modes. In single-shot mode, each individual hit is counted separately, while in burst mode, a rapid sequence of shots is registered as a single hit. This functionality enables more accurate evaluation of controlled fire and tactical shooting exercises.

The stationary infantry target system is designed to handle a wide range of military target silhouettes with high speed and precision. It can lift and position targets weighing up to 5 kg (11 lbs), including full-size and half-size 2D and 3D infantry targets commonly used in shooting range training.

Under standard conditions, the system can raise or reposition targets in less than 1 second, enabling fast, responsive target presentation. Even in challenging outdoor environments, such as wind speeds of up to 55 km/h, the stationary infantry target system maintains reliable performance, adjusting target positions in under two seconds.

This capability ensures consistent operation in both indoor and outdoor shooting range environments, supporting realistic training scenarios while maintaining accuracy and control.

The stationary infantry target system can be equipped with a wide range of optional components to enhance realism, functionality, and safety in modern shooting range environments. These upgrades allow the system to be tailored to specific military and law enforcement training requirements.

To improve visibility, the system can include an illumination unit to illuminate the target silhouette during low-light or nighttime training. An optional infrared lighting function is also available, supporting advanced tactical scenarios and night operations.

To increase realism, the stationary infantry target can be fitted with a muzzle-flash simulator to replicate the visual effect of weapon fire. Additional pyrotechnic and non-pyrotechnic fire simulation systems further enhance training by creating realistic engagement environments.

For expanded functionality, an optional adaptor enables turning target capabilities, allowing the stationary system to simulate directional exposure without requiring a moving target system.

Advanced training features include a thermal imaging overlay, which adds a lifelike heat signature to the target, and a LOMAH (Location-Of-Miss-And-Hit) system that provides precise feedback on shot placement and near misses to improve shooting accuracy.

To enhance safety and durability, the system can also be equipped with a ballistic shield to protect critical components and reduce ricochet risk during shooting range operations.

shooting range infrastructures. It can be connected to modern range control systems, allowing centralized management of target behavior, hit detection, and training scenarios across multiple lanes.

The system is compatible with both standalone operation and integrated setups, making it suitable for upgrading existing shooting range target systems without requiring a complete redesign. This flexibility supports the efficient modernization of military and law enforcement training facilities.

Yes, stationary infantry target systems are engineered for continuous operation in demanding shooting range environments. They are built with durable components and robust mechanical systems to withstand intensive training cycles commonly required in military and law enforcement applications.

The design focuses on reliability and minimal downtime, ensuring consistent performance during extended training sessions. This makes the system suitable for high-frequency use, including qualification programs and large-scale training exercises.

Stationary infantry target systems are designed to operate reliably in a wide range of environmental conditions, including wind, rain, and temperature variations. Their rugged and weather-resistant construction ensures consistent performance in outdoor shooting range environments.

Even under challenging conditions, such as strong winds, the system maintains stable target positioning and precise movement of the target holder. This makes it well-suited for military training scenarios where environmental factors cannot be controlled.

Stationary infantry targets are primarily used for controlled and repeatable training scenarios where accuracy and consistency are critical. Common applications include marksmanship training, weapon zeroing, qualification and certification exercises, and basic infantry training.

By providing stable target positioning with controlled exposure, the stationary infantry target system allows trainees to focus on target identification, shot placement, and engagement techniques. It is widely used in both indoor and outdoor shooting range environments for military and law enforcement training.

Yes, stationary infantry target systems are highly customizable to meet specific training requirements. The system is available in different configurations, including SIT Standard and SIT Advanced, each offering various target presentation modes.

Additional adaptors and accessories can be integrated to expand functionality, allowing the system to support a wide range of training scenarios. This modular approach ensures that shooting range operators can tailor the system to their operational needs, from basic marksmanship training to more advanced tactical exercises.

Targets you may be interested in

Armor targets

TTS offers various types of armor targets that are specialized tools designed to mimic the characteristics of armored vehicles or fortified structures, primarily aiding military and specialized law enforcement units in training. TTS enhances this training by offering professional live-fire solutions, especially for gunners and armored vehicle crews.

VIEW PRODUCT

Turning target system

TTS offers a turning target that is expertly crafted to rotate target silhouettes 360° independently, offering dynamic and scalable training for indoor and outdoor shooting ranges. This versatile system is available in both portable and fixed-installed versions, with fixed installations capable of being mounted on the ground or ceiling.

VIEW PRODUCT

Electronic scoring target

TTS offers an advanced LOMAH (Location-of-Miss-And-Hit) system for supersonic projectiles and precise scoring solutions for subsonic projectiles through our Box Targets technology. These electronic target systems provide immediate and accurate feedback for training and competitive environments, facilitating rapid skill improvement in precision shooting and zeroing.

VIEW PRODUCT

Stationary Infantry Targets for Shooting Ranges

Key Advantages of Stationary Infantry Targets

Advanced Pop-Up Mechanism (SIT Advanced)

Accurate Hit Detection with Adjustable Sensitivity

Flexible Deployment Options

Flexible Control Options

Flexible Power Supply Options

Reliable Performance in All Environments

Safe and Hassle-Free Operation

Built-In System Diagnostics

Stationary Target Presentation Modes

Pop-Up Mode

Extended Target Presentation Modes

Stationary Infantry Targets in Action

Frequently asked questions

How is a stationary infantry target installed?

How does hit counting work in a stationary infantry target system?

What is the lifting capacity of a stationary infantry target system?

What additional equipment is available for a stationary infantry target system?

Can stationary infantry targets be integrated into existing range systems?

Are stationary infantry target systems designed for continuous use?

How do stationary infantry targets perform in harsh weather conditions?

What training scenarios are stationary infantry targets used for?

Can stationary infantry target systems be customized for specific training needs?

Targets you may be interested in